Tech Tip: Troubleshooting Maytag & Whirlpool Oven Fans

SUBJECT
Troubleshooting fans in Maytag and Whirlpool combination, double, and single-wall oven models below:

Oven-Models

PROBLEM
Cooling fan will not cycle off after cooking cycles.

CAUSE
When the control is set to Energy Save Mode (not described in the Use and Care Guide), the control will not cycle the cooling fan off.

NOTE
An oven that’s operating normally will run the cooling fan after cooking cycles until the oven cavity cools to 100⁰C or 212⁰F. This could take up to 45 minutes.

SOLUTION
Deactivate the Energy Save Mode. Press and hold the Settings keypad for three seconds or until you see “Energy Save Off” in the upper text area. The clock will reappear in the display, and the range can be operated as designed.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *